Product Description
Product Description Dry Cooling Tower
GKM Series Air Cooling Tower
GKM Series have been developed since 2012, with a wide range of cooling capacities, and customized in most cases. The enclosure is made in Mg-Al-Zn alloy coated steel, or stainless steel optional. And the heat exchange coils is made in Copper Tube or stainless steel tubes fitted with aluminum or copper fins around the tubes. The fluid inlet and outlet are set on the same side, more convenient and economical for pipe lines installations. The overall dimensions can be tailor-made to suit standard 20’ or 40’ shipping containers in order to minimize freight costs. GKM Dry Cooling Towers are more suitable to cool inlet fluid of higher temperature, widely applied in circulating fluid (water, oil, gas) cooling for Air Compressors, Heaters, Furnace, and other machines in Gas Stations, Refinery Industries, etc. , especially in the area lack or short of water resources.
Main Configeration
STRUCTURE & CASING The tower enclosure is made in special alloy (Mg-Al-Zn) coated steel panels, originally imported from Nippon Steel or Posco. These panels exhibit superior corrosion resistance, and self-heal when scratched during the service period. The panels are bolted and sealed for water tightness. The casing is complete with maintenance access doors for internal inspection convenience.
DRY COOLING COILS The dedicated dry cooling coils in GKM Series is used exclusively for the purpose of dry cooling, fitted with particularly shaped aluminum fins around the coils tubes, to maximize surface area of heat transfer. The standard coils tubes is made in stainless steel 304, of tube wall thickness 0.6mm, or red copper of wall thickness 0.8mm. Different thickness can be met on request. Each coil is tested under continuous nitrogen gas pressure of 30 bar for 24 hours, to ensure no leaking point.
AXIAL FAN SECTION The axial fan(s) are fitted with resin or al-alloy airfoil blades perfectly balanced and coupled to a weather proof three-phases electric motor. The fan casing is a galvanized steel cylinder to draw the air vertically and avoid the risk of recirculation. The tip speed of the impeller is limited to keep the noise
Working Theory
Certificates
Product Show
Packing & Delivery
FAQ Model Selection Guide Below information are normally required to know for selection of a most proper tower model and solution:
For easier discussions, 24 hours on line service available: Angela is online: skype: oasanjiu Mob./WhatsApp: 13559666650
Many thanks for your interests, and your inquires are always well attended!
Contact us if you need more details on Dry Cooling Tower. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Air Cooling Towers、Air Cooler. If these products fail to match your need, please contact us and we would like to provide relevant information.
GKM Series Air Cooling Tower
GKM Series have been developed since 2012, with a wide range of cooling capacities, and customized in most cases. The enclosure is made in Mg-Al-Zn alloy coated steel, or stainless steel optional. And the heat exchange coils is made in Copper Tube or stainless steel tubes fitted with aluminum or copper fins around the tubes. The fluid inlet and outlet are set on the same side, more convenient and economical for pipe lines installations. The overall dimensions can be tailor-made to suit standard 20’ or 40’ shipping containers in order to minimize freight costs. GKM Dry Cooling Towers are more suitable to cool inlet fluid of higher temperature, widely applied in circulating fluid (water, oil, gas) cooling for Air Compressors, Heaters, Furnace, and other machines in Gas Stations, Refinery Industries, etc. , especially in the area lack or short of water resources.

DRY COOLING COILS The dedicated dry cooling coils in GKM Series is used exclusively for the purpose of dry cooling, fitted with particularly shaped aluminum fins around the coils tubes, to maximize surface area of heat transfer. The standard coils tubes is made in stainless steel 304, of tube wall thickness 0.6mm, or red copper of wall thickness 0.8mm. Different thickness can be met on request. Each coil is tested under continuous nitrogen gas pressure of 30 bar for 24 hours, to ensure no leaking point.
AXIAL FAN SECTION The axial fan(s) are fitted with resin or al-alloy airfoil blades perfectly balanced and coupled to a weather proof three-phases electric motor. The fan casing is a galvanized steel cylinder to draw the air vertically and avoid the risk of recirculation. The tip speed of the impeller is limited to keep the noise
Working Theory






Many thanks for your interests, and your inquires are always well attended!
Contact us if you need more details on Dry Cooling Tower. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Air Cooling Towers、Air Cooler. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Air Cooling Tower
Email to this supplier
Premium Related Products
Other Products
Hot Products
Compressing hydraulic bottle balerHigh heating power 36kw mold electric water heaterSeperating industrial sieves and screensIndustrial water chillerplastic cover cooling towersHeat ExchangerInduced Draft Dry Cooling TowerCounter Flow Rectangular Liquid Cooling PlantHot Water Treatment TowerInjection Molding Cooling TowerSquare Closed Cooling towerCounter Flow Closed Square Cooling Tower183 Ton Water Cooled Screw Air Compresser Cooling SystemCustomized Closed Cooling TowersWater Spray Nozzles for Open Cooling Towersair cooler